Setting

AUX FUNCTION screen

Item

Functions and settings

AUX MODE This item sets the signal input or output of the AUX terminal.

B&W OUT : A signal is output when the camera switches to B&W or Color mode.

SCENE IN : Depending on the input signal of the AUX terminal, the camera can switch between scene files (A, B only).

IR IN

: Depending on the input signal of the AUX

 

terminal, the camera can switch between

 

B&W and Color mode. When there is an

 

alarm input, the mode will be B&W.

TWhen the INPUT POLARITY item of the AUX FUNCTION is AMAKEB

When the contact is short (MAKE), the mode is B&W. When the contact is open (BREAK), the mode is Color.

TWhen the INPUT POLARITY item of the AUX FUNCTION is ABREAKB.

When the contact is open (BREAK), the mode is B&W.

When the contact is short (MAKE), the mode is Color. [Setting: SCENE IN, IR IN, B&W OUT]

[Default setting: B&W OUT]

Memo:

●Even when this item is set to B&W OUT, B&W OUT

will not output in B&W mode when the COLOR OVERLAY item of B&W/COLOR is set to AONB. To

use B&W OUT signal in external illumination linkage, set COLOR OVERLAY to AOFFB. (A Pg. 47)

●The switching of scene files by AUX input is for 2 scenes AA,BB only. Switching to SCENE C, SCENE D

requires operation from external communication.AScene file functionB (A Pg. 64)

38