1.Check the mounting method of the lens before mounting

●This camera is set to CS-mount lens before shipment. To use a C-mount lens, loosen the back focus fastening screw with a screwdriver, turn the back focus adjustment ring with your finger or the screwdriver and change the mounting method.

●For the dimension (a) of the lens mounting section as illustrated in the diagram, use the value that is shown in the table below.

Note:

●Never use one that exceeds the dimension (a) as it will damage the inner part of the camera and will not allow normal installation. This will result in a malfunction.

LensFlange back (b)Dimension (a)

 

 

 

C-mount lens

17.526 mm

5.5 mm or less

 

 

CS-mount lens

12.5 mm

 

 

 

 

2.Turn the lens clockwise and mount it securely on the camera.

3.For an automatic iris control lens, select the switch on the side of this camera according to the lens used.

VIDEO

: When using a lens with a built-in EE amplifier

DC

: When using a lens without a built-in EE amplifier

4.In the case of an automatic iris control lens, check the pin arrangement and connect the lens cable to the socket.

4 pin plug
PinDC IRIS lensVIDEO IRIS lens

number

(Without built-in EE amplifier)

(With built-in EE amplifier)

 

 

 

1

Brake (-)

9.0 V (Max. 50 mA)

 

 

 

2

Brake (+)

NC

 

 

 

3

Drive (+)

VIDEO

 

 

 

4

Drive (-)

GND

 

 

 

21