COMMUNICATION screen

This item sets the control signal connection terminals at the back of the camera.

If the setting is changed, be sure to close the menu screen before switching on the power again. The screen display when power is switched on differs according to the setting of this item.

Item

 

Functions and settings

 

 

TYPE

This sets whether the communication with the control

 

device is bi-directional or unidirectional. Select the setting

 

according to the device to be connected.

 

SIMPLEX

: Select this to connect an unidirectional

 

 

communication control device.

 

DUPLEX

: Select this to connect a bi-directional

 

 

communication control device.

 

[Default setting: DUPLEX]

 

 

STYLE

This sets a communication system. Select the setting

 

according to the system used.

 

P TO P (Point to Point)

 

:This is set when a remote control unit controls a camera.

 

MULTIDROP

 

:This is set when a remote control unit controls multiple

 

cameras.

 

[Default setting: P TO P]

 

 

MACHINE ID

This is set when the STYLE item is set to AMULTIDROPB.

 

This number identifies individual cameras in a group. This

 

item does not operate properly if an ID number is repeated

 

within a system.

 

When used in combination with RM-P2580E,set the item

 

together with the VIDEO INPUT number of RM-P2580E.

 

When STYLE item is set to P TO P, A- - -Bwill be displayed

 

and settings is disabled.

 

[Setting: 1 to 99]

 

 

 

Screen display when power is switched on

Monitor screen

PROTOCOL : DUPLEX ID-05

TYPE display Only displayed when the STYLE item is MULTIDROP

Memo:

●Only the following 4 types are displayed.

●DUPLEX

●DUPLEX ID-TT

●SIMPLEX

●SIMPLEX ID-TT

(TT indicates that MACHINE ID setting is required)

51