Manuals / Brands / Photography / Digital Camera / JVC / Photography / Digital Camera

JVC TK-C1530U/E DIGITAL, Adjusting the lens, With a VIDEO automatic iris lens (Automatic iris control lens with

1 70

Download 70 pages, 2.71 Mb

Adjusting the lens

After the connection is complete, turn on the camera, display an image on the monitor and check the video image.

In the case of an automatic iris control lens, the camera has been factory- adjusted to the best position, but it may need to be adjusted according to the condition of the object or the lens combination. If the image is unnatural, adjust it.

●Also read the instruction manual of the lens.

With a VIDEO automatic iris lens (Automatic iris control lens with built-in EE amplifier)

Set the switch at the side of the camera to A VIDEO B and adjust the LEVEL dial on the lens.

LEVEL adjustment

L H	LEVEL
Av Pk	ALC

DIGITAL

Do not operate

With a DC automatic iris lens (Automatic iris control lens without built-in EE amplifier)

Set the Iris Selector Switch at the side of the camera to A DC B and adjust the LEVEL with the Iris Level Adjustment Dial at the side of the camera.

IRIS

VIDEO

DC

COLOR VIDEO CAMERA LEVEL

Iris Selector Switch

IRIS

VIDEO
DC		Iris Level
		Iris Level
	LEVEL	Adjustment Dial
	LEVEL

30

Contents

Page FOR USA Page FOR USA AND CANADA INFORMATION FOR USA INFORMATION Attention: Dear Customer Sehr geehrter Kunde, sehr geehrte Kundin Features Realizing a High Picture Quality Day/Night surveillance CRT/LCD monitor compatible Realizing sharper video images Contents Introduction Setup Setting Detailed setting Operating Precautions Storage and Location of Use Maintenance Energy Conservation Others Name of Parts and their Functions Front/Bottom/Side panel ABack focus adjustment ring BLens Mount CCamera-mountingbracket fixing screws (x2: M2.6 x 6 mm) Note: D[IRIS] Iris Terminal E[VIDEO,DC] Iris Selector Switch F[LEVEL] Iris Level Adjustment Dial GRotation-preventivehole Name of Parts and their Functions (continued) Back panel TK-C1530 TK-C1531EG K[AC24V,DC12V] Power input terminal L[TX+ A ,TX- B ,RX+ C ,RX- D ] Control signal connection terminal M[AUX,GND] External terminal N[VIDEO OUT] Video signal output connector O[SELECTOR/SET] Selector switch/Set button Q[RX TERM-OFF,ON/INT,LL] Function Selector Switch [RX TERM-OFF,ON] RX Signal Terminal ON/OFF Switch R[POWER] Power indicator lamp SMounting Screw for Fall Prevention Wire TAC 220 V-240V power cord Setup System Example Memo: System Example (continued) Precautions when using RM-P2580E: Turn ON the power of the camera to be checked 3.Confirm that ADUPLEXB is displayed and that the ID number is correct 4.If the number is wrong, set the MACHINE ID again Flow for Connection/Settings step Mounting the lens (A Pg. 20) Connecting the back panel (A Pg. 22) Mounting the camera (A Pg. 25) Mounting the lens 1.Check the mounting method of the lens before mounting Lens Flange back (b) Dimension (a) 2.Turn the lens clockwise and mount it securely on the camera Connecting the back panel Connecting the power cable TK-C1530 (AC24 V or DC12 V) TK-C1531EG (AC 220 V-240V) Video signal coaxial cable Connecting the control signal cables Connecting the back panel (continued) Connecting alarm input/output terminal Alarm input terminal Alarm output terminal Mounting the camera Mounting the camera (continued) Mounting the camera-mountingbracket on top of the camera Remove the 2.Mounting the camera-mountingbracket on top of the camera 3.Mounting the camera onto a fixer, pan/tilt unit and the like Fall Prevention Precautions regarding fall prevention Adjusting the back focus With a fixed-focuslens Loosen the back focus fastening screw by turning it Shooting an object or a picture with fine patterns that is away from the object 3.Turn the lens focus ring to ∞ 4.Turn the back focus adjustment ring to focus at the best point Adjusting the lens With a VIDEO automatic iris lens (Automatic iris control lens with DIGITAL With a DC automatic iris lens (Automatic iris control lens without LEVEL adjustment Adjusting the auto white balance Error display Press the SET button for approx. one second Adjustment is complete Error display AWC ERROR : NG OBJECT (Object error) AWC ERROR : LOW LIGHT (Insufficient Illumination) Setting Menu basic operation 5.Press the SELECTOR switch left or right (H, I) to change the setting Press the MENU button Press the MENU button again flow The screen menu of Page AUX FUNCTION screen AUX MODE TWhen the INPUT POLARITY item of the AUX FUNCTION is AMAKEB TWhen the INPUT POLARITY item of the AUX FUNCTION is ABREAKB INPUT POLARITY TITLE/VIDEO screen CAMERA TITLE EDIT TITLE/VIDEO screen (continued) AWC MANUAL SPEED LIMIT Page (continued) MAX FIX ACOLORB display differs depending on the model (TK-C1530U) B&W COLOUR (TK-C1530E (continu ZDisplay for TK-C1530U. For TK-C1530E ed) TK-C1531EG, COLOUR is displayed To ensure a successful B&W/Color switching LEVEL TIME COLOR OVERLAY BLC MODE IRIS MODE S.E.C (Smart Edge Control) DISPLAY screen MONITOR TYPE LL ADJUSTMENT screen V.PHASE PRIVATE MASK screen MASK No.1 MASK No.2 MASK No.3 MASK No.4 COMMUNICATION screen STYLE MACHINE ID MAINTENANCE screen CCD SPOT SCAN FACTORY SETTING screen CANCEL CLEAR(WITH OUT TITLE) CLEAR(ALL) Detailed setting Camera title setting Select the item Repeat steps 2. to Press the MENU button How to operate Menu operation State Manual adjustment of white balance Set the Press the SELECTOR switch left or right (H, I) to change the setting Output of B&W/Color switching signal Set the AUX MODE item to AB&W OUTB 4.Press the MENU button twice Set the B&W/COLOR item to AUTO 1.Select the item B&W/COLOR on the TITLE/VIDEO screen and press the SET button Control by B&W/Color switching signal from external To switch AGC and SHUTTER settings together with B&W/Color mode switching Private mask setting Selection of mask number 2.Select a mask number with SELECTOR switch (J, K) 3.Select AONB with SELECTOR switch (H, I) and press the SET button (If AOFFB is selected, private mask will not be displayed.) Setting a mask area Select a Edit left/top or right/bottom of mask respectively Completion of mask setting Scene file function Switching day/night video settings with the scene file function SCENE A (Day) Setting example for day use SCENE B (Night) Page Specifications Camera Signaling method Image pickup device Imaging area Scanning frequency Lens General Power supply Power consumption Ambient temperature Specifications (continued) Page C1531EG-C1530U/E,TK-TKCAMERA VIDEO COLOR