JVC TM-1011G Size/Posi. Adj, Distortion Adj, Status Display, Control Lock, all reset, Blue Cutoff

7BLUE CUTOFF

Adjusts the blue cut-off point.

•MIN O MAX (in 155 grades)

7RED CUTOFF

Adjusts the red cut-off point.

•MIN O MAX (in 155 grades)

SIZE/POSI. ADJ.

Adjusts the size and position of the picture.

7H. SIZE

Adjusts the horizontal screen size.

•–20 O 00 O +20 (*)

–:Reduces the screen size horizontally.

+: Enlarges the screen size horizontally.

*You can adjust this item with in the range between 00 and +20 during the under-scan mode.

7H. POSITION

Adjusts the horizontal screen position.

•–20 O 00 O +20

–:Moves the screen to the left.

+: Moves the screen to the right.

7V. SIZE

Adjusts the vertical screen size.

•–20 O 00 O +20

–:Reduces the screen size vertically.

+: Enlarges the screen size vertically.

7V. POSITION

Adjusts the vertical screen position.

•–10 O 00 O +10

–:Moves the screen down.

+: Moves the screen up.

DISTORTION ADJ.

Compensates the picture distortion.

Also compensates the picture tilt which is caused by geomagnetic influence.

7PARALLELOGRAM

Compensates the parallelogram picture distortion.

•–20 O 00 O +20

–:Moves the upper side of the picture to the right, and the lower side to the left.

+: Moves the upper side of the picture to the left, and the lower side to the right.

7TRAPEZOID

Compensates the trapezoid picture distortion.

•–20 O 00 O +20

–:Enlarges the upper side of the picture.

+: Reduces the upper side of the picture.

7ROTATION

Compensates a picture tilt.

•–31 O 00 O +31

–:Turns the picture clockwise.

+: Turns the picture counterclockwise.

STATUS DISPLAY

Sets the item related to turning on/off the status display.

7STATUS DISPLAY Sets the status display.

• AUTO/MANUAL/OFF

☞“About the status display” on page 5

CONTROL LOCK

Prohibits altering the monitor operations except turning the monitor on/off and deactivating this function.

• ON/OFF

NOTES:

•When “CONTROL LOCK” is set to “ON,” “ Control lock on!” appears on the screen if you try to operate the monitor.

•Operating the monitor by the external control is available if this function is activated.

all reset

Resets all the settings you have made to factory-preset values.

•Adjustments made by using the front panel buttons will also be reset.

1.Move the MENU/VOLUME control to / to select “all reset,” then move it to . Confirmation message is displayed.

2.To initialize, move the MENU/VOLUME control to .

•To cancel the initialization, press the MENU/ VOLUME control.

13