Parts and Functions

9

Preparation

AInspect the main casing for scratches and cracks.

Apply 2 or 3 drops of the anti-fog liquid provided onto a lens tissue paper provided or a clean cloth, and wipe the inner side of the marine case front glass.

Strap

8 7 6

2 4

Front glass

4

B Check the O-ring.

Using the pick provided, remove the O-ring

1

3

5

from the main case.

B

Bottom view

1.Main casing grip

Attach the strap provided as shown in the diagram above.

2.Zoom lever

Zoom (tele/wide) while shooting.

3.Ring

Commercially available filters (67 mm diameter) can be attached.

4.Buckle (3 locations) Seal the marine case.5.Grip attachment holes

You can attach the grip provided, or commercially available weights.

6.Still image lever

Press to take still images.

7.Video recording start/stop button Press once to start recording a video. Press again to stop.

8.Mode switch

Switches the shooting mode (video/still).

9.Power button

Turns camera’s power on/off.

Check the O-ring, O-ring contact surface, and

groove in which the O-ring fits for foreign

matter, nicks, cracks, etc.

Be sure to remove any foreign matter (dirt,

sand, salt crystals, hair, lint, etc.).

¹ For details, refer to the “O-ring

Maintenance Manual”.

Caution

zNever use the O-ring in case of nicks and cracks.

zIf the O-ring is handled inappropriately, it can cause water leakage .

CApply grease to the O-ring and re-attach.DClose the empty marine case (no camera inside).

ESubmerge the marine case in water and check that there are no water leaks.

(A Pg. 8)

6