zBe sure to lock the lever after switching the shooting mode.zTo lock the lever, pull it towards you and turn it to the right.zTo unlock, pull the lever towards you and turn to the left.

2 Lock

Pull 1

CPress the video recording start/stop button or the still image lever to start recording.

Zooming (Tele)

Zooming

Still image lever (Wide) Shoot still images.

Detaching the camera

If there is a need to detach immediately:

ASubmerge the marine case in fresh water and shake the marine case in the upward, downward, left and right directions for at least 10 times, followed by rinsing it.

BRemove the marine case and wipe off water droplets on the case surface using a dry towel.

CFace the front glass of the marine case upwards, and open the buckles to remove the camera, while paying attention not to let water droplets at O-ring or buckles enter the case.

DUpon removing the camera, close the marine case again while paying attention not to allow water droplets enter the case, followed by tightening all the buckles.

¹Always perform maintenance on the marine case after using. (A Pg. 10)

Video recording start/stop button

Start/stop the video recording.

DWhen you have finished recording, press and hold the power button for more than 2 seconds to turn off the camera.

z The camera’s power lamp goes out and the monitor turns off.
If there is no need to detach immediately:Perform maintenance on the marine case. (A Pg. 10)

9