SAT measurement
✐
DiSEqC-
E■
DiSEqC™ menu
DiSEqC™ menu
Note
Example for a USER entry
You wish to check the EXR 22 KATHREIN matrix. The instruction set for the EXR 22 matrix is E0 00 24 (LNB High) and E0 00 20 (LNB Low).
Calling up DiSEqC™:
Press [2ndF] [SAT-CTRL]
Press [0] to call up USER entry.
You can now enter the indvidual code words by pressing [0] to [9] and [./S]. Press [ENTER] to send the command. „>“ signalises the successful sending of the command.
The instruction set to trigger the EXR 22 KATHREIN matrix has been entered and sent.
☞ | Please find the DiSEqC™ instruction sets for KATHREIN matrices, Types | ||
EXR 20 and EXR 22 and for the 9xx production run in the technical | |||
appendix. |
| ||
Framing Byte Menu |
|
|
|
|
|
|
|
| HEX |
| description |
| Byte |
|
|
À | E0 |
| Command from master, nonrecurring transmission |
E1 |
| Command from master, recurrent transmission | |
E2 |
| Command from master, response anticipated, first transmission | |
| E3 |
| Command from master, response anticipated, recurrent |
|
|
| transmission |
| E4 |
| Response from slave, „OK“, no errors recognised |
| E5 |
| Response from slave, command not supported by slave |
| E6 |
| Response from slave, parity error recognised |
| E7 |
| Response from slave, command not identified |
27
