Kathrein UFS 790sw, UFS 790si First Installation, DiSEqC1.0 One cable automatic or manual setting

FIRST INSTALLATION

Note:

If the receiver is already connected to a satellite reception system and/or a DVB-T antenna, select “Yes” for the related operation mode or both operation modes to be able to start a search for the related operation mode at the end of the first installation.

You can change between the operation modes using the  buttons. Make the “Yes” or “No” settings using the  buttons. Press the ! (green) button to open the next menu:

Select the required setting for your LNB control using the buttons (only on connection of the receiver to a satellite reception system). The following options are available:

-DiSEqC™1.0

-One cable (automatic or manual setting)

-No LNB power (if your LNB has a dedicated power supply)

-No DiSEqC™

-Toneburst

Continue the first installation with the related section.

14