Kathrein UFS 790sw, UFS 790si manual Security

SECURITY

Press the  button to open the main menu. Select the “Security” menu using the  buttons and press the  button. Enter the receiver PIN (factory setting “0000”) and confirm it by pressing the  button. The following display appears (see example below):

Usesettings.the  buttons to select the lines to be changed and use the  buttons to perform the

Receiver Lock:

If the receiver lock is set to “On”, when the receiver is switched on it will request input of the PIN.

Menu Lock:

If the menu lock is set to “On”, the PIN must be entered as soon as the main menu is opened.

Channel Lock:

If the channel lock is set to “On”, the PIN must be entered as soon as a channel is opened that has been marked as locked in “Edit Channel List”.

Change Device-PIN:

Press the  button, you will be requested to enter the old PIN. Confirm the entry of the old PIN using the

button. Now enter the new PIN and confirm by pressing the  button. Then you must enter the new PIN again and also confirm using the  button. “The receiver PIN has now been changed” is displayed. Press the  button to close the message.

56