OPERATION

 

 

OPENING THE OPTIONS CHANNEL

If the banner displays the following icon

, this is a portal channel. Pressing the " (yellow)

button displays the channels available on this portal (such as matches on a specific day of play). In this example three “sub-channels” are available for selection within this portal channel. Select the channels

using the  buttons and .

PICTURE SCALING AND AUDIO OUTPUT FORMAT

By pressing the !(green) button you can change the following settings directly on the TV screen, without having to open the main menu:

- Picture Scaling: Select using the (red) button. The possible settings depend on the setting you made on the “Box Settings”, “TV picture settings”.

-HD Video Resolution: Select using the # (blue) button. Select the setting suitable for your TV set (note the information in the operating instructions for your TV set).

-Audio Format: Select using the ! (green) button. You can choose between the settings Stereo, Mono (left), Mono (right) and Mono.

The display disappears again automatically after approx. five seconds.

TELETEXT

Press the  button to open teletext. When teletext is opened for the first time you will be asked whether you wish in future to open teletext using the receiver remote control or, as usual, using the TV set remote control

(see screenshot below). Use the  buttons to select the desired variant and

press the  button to confirm.

When using teletext via the receiver remote control:

You can open the required teletext page using the number pad. Using the  buttons you can page back and forwards by one page. If you press the  button again, the teletext is displayed transparent.

To leave the teletext, press again the  button or the  button.

32

Page 32
Image 32
Kathrein UFS 790sw, UFS 790si manual Opening the Options Channel, Picture Scaling and Audio Output Format, Teletext