Kathrein UFS 790si, UFS 790sw manual Automatic Search DVB-T Terrestrial

SEARCH FOR CHANNELS

AUTOMATIC SEARCH (DVB-T) TERRESTRIAL

When using an active antenna, ensure the power supply for the antenna is switched to “On”. You can check this setting on the menu “Box Settings”, “Antenna settings”.

The receiver automatically defines in the software the lowest start frequency and highest end frequency. You should only change these settings if you know exactly on which channels the DVB-T

channels are broadcast in your area. You can make the changes using the  buttons, the line to be changed can be selected using the  buttons. In addition, in the “Channels to search for” line

you can use the  buttons to select whether you want to search only for free-to-air channels, only for encrypted channels, or for all channels. Once you have made all the settings, switch to the

last line and start the search using the  button. The following display appears:

53