Kathrein UFS 790sw Receiver Features and Product Package, This update time cannot be changed

RECEIVER FEATURES AND PRODUCT PACKAGE

RECEIVER FEATURES

The UFS 790si and UFS 790sw receivers enable digital satellite and digital terrestrial TV and radio channels to be received.

The decoding system for Conax is already integrated. In addition one Common Interface for a CA module is provided for decoding additional satellite Pay-TV channels.

The HDMI interface offers the optimum capability for connecting the receiver to a suitable flat-screen TV set.

The receivers have comprehensive features such as 16-character alphanumeric display for program names, electrical and optical audio outputs for Dolby Digital (AC 3) and Videotext with memory capacity for 800 pages.

These receivers are available in silver or black housings.

SWITCHING OFF THE RECEIVER AND UPDATING THE EPG

By pressing the button on the remote control you can switch the receiver out of TV mode to the standby mode, and back again.

The receiver has the facility to update the EPG overnight, i.e. at 03:00 the receiver automatically starts to update the EPG data. This procedure may take a few minutes, and is not shown in the receiver display. If the receiver is programmed to make a recording at this time, the updating is postponed until 03:00 the following night.

This update time cannot be changed.

This updates the EPG data for the first 25 channels of the overall channel list. However, this update is only performed if the receiver is in standby mode. If the receiver is completely switched off (at the mains) or if it is in operation, the update will be delayed. After updating the data, the receiver automatically switches back

to the standby mode. If during the update you press the  button, the update is aborted and the receiver switches itself on.

PRODUCT PACKAGE

-UFS 790si (silver) or UFS 790sw (black)

-Infra-red remote control

-Scart cable

-2 batteries AAA 1.5 V

-Power supply cable

-Operating manual

6