Kathrein UFS 790si, UFS 790sw manual First Installation Dvb-T Antenna

FIRST INSTALLATION (DVB-T ANTENNA)

Using the  buttons, select whether the DVB-T antenna is to be supplied with power from the receiver (select “On”) or whether the DVB-T antenna has a dedicated power supply (select “Off”).

Press the ! (green) button to open the next menu:

Make here the settings for the parameters for the DVB-T channel search. The receiver automatically defines in the software the lowest start frequency and highest end frequency. You should only change these settings if you know exactly on which channels the DVB-T channels are broadcast in your area.

You can make the changes using the  buttons, the line to be changed can be selected using the

 buttons. In addition, in the “Channels to search for” line you can use the  buttons to select whether you want to search only for free-to-air channels, only for encrypted channels, or for all channels.

Press the ! (green) button to open the next menu:

27