SERVICE MENU
UPDATE SOFTWARE NOW
The following displays appear:
If as well as the new software a new servicelist for the receiver is also offered, you have the following selection options (use the buttons to make the selection):
-“Start update software”
-“Start update servicelist”
-“Start update servicelist and software”
Confirm the desired selection with the button.
The following display appears (example):
When updating the servicelist, before installation you will see a display in which you can select how the servicelist should be updated (use the buttons to make the selection).
You can choose between:
-“Overwrite” - your existing servicelist will be completely replaced by a new list of available channels. Your personal channel sorting will be lost.
-“Update” - your existing list will only be updated, any new channels found will be added at the end of the channel list. The sort sequence of your channel list remains unchanged; the only change is that the channel data (transmission frequency etc.) are updated
-“Save, do not activate” - the new servicelist will be saved by the receiver and can be selected at the next factory reset. This has no effect on the current servicelist
-“Abort” - the new servicelist will not be loaded
Confirm the desired selection with the button. The following display appears:
68
