The product is not completely disconnected from the power supply even when the power switch is turned off. If the product will not be used for a long time, unplug the AC power cord from the AC outlet.

Failure to do so may cause fire in case of lightning. Failure to do so may over-heat the product, resulting in fire.

This product may be equipped with a polarized line plug (one blade wider than the other). This is a safety feature.

If you are unable to insert the plug into the outlet, contact an electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the plug.

It is a good practice to have the instrument near the AC outlet and the power cord plug in a position so that it can readily be disconnected in an emergency because electricity is always charging while the plug is in the AC outlet even in a power switch off condition.

Indicates a potential hazard that could result in injury or CAUTION damage to the product or other property if the product

is handled incorrectly

Do not use the product in the following areas.

Areas, such as those near windows, where the product is exposed to direct sunlight

Extremely hot areas, such as near a heater

Extremely cold areas, such as outside

Extremely humid areas

Areas where a large amount of sand or dust is present Areas where the product is exposed to excessive vibrations

Using the product in such areas may result in product breakdown.

Use the product only in moderate climates (not in tropical climates).

Before connecting cords, make sure that the power to this product

and other devices is turned OFF.

Failure to do so may cause breakdown of this product and other devices.

Take care not to allow any foreign matter to enter the product.

Do not drag the product on the floor.

Take care not to drop the product.

Do not place the product near electrical appliances such as TVs and

radios.

When disconnecting the AC power cord’s plug, always hold the plug

and pull it to remove it.

Do not wipe the product with benzene or thinner.

Do not stand on the product or exert excessive force.

Entry of water, needles or hair pins may result in breakdown or short-circuit.

The product shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the product.

Please lift up the product when moving it. Please note that the product is heavy and must be carried by more than two persons.

Dropping the product may result in breakdown.

Doing so may cause the product to generate noise. If the product generates noise, move the product sufficiently away from the electrical appliance or connect it to another AC outlet.

Failure to do so may damage them, resulting in fire, electric shock or short-circuit.

Doing so may result in discoloration or deformation of the product.

When cleaning the product, put a soft cloth in lukewarm water, squeeze it well, then wipe the product.

Doing so may cause the product to become deformed or fall over, resulting in breakdown or injury.

The product should be located so that its location or position does not interfere with its proper ventilation. Ensure a minimum distance of 5cm around the product for sufficient ventilation.

Ensure that the ventilation is not impeded by covering the ventilation openings with items, such as newspaper, table-cloths, curtains, etc.

3

Page 3
Image 3
Kawai MP5 manual Is handled incorrectly