6. MENU
The MENU buttons allow access to the edit parameters in the MP5. This collection of settings together with other editable parameters can be stored as a SETUP. The MP5 provides 256 SETUPs, and all are user programmable.
A SETUP consists of four zones. Each zone can be set as Internal, External or Both individually. Inside each of the four zones, a multitude of features and effects can be programmed and combined together into one exciting SETUP. A total of 256 SETUPs may be programmed in this way.
The menu consists of Internal parameters, External parameters and Common parameters.
Common parameter affect all zones. If a zone is set as Both, both the Internal parameters and External parameters are available for the zone.
Use the MENU buttons to scroll through all the different parameters.
In SOUND mode, both the Int Zone parameters and the Common parameters without the inverse “S(Setup)” icon can be individually stored. (see page43) The Int Zone parameters can be stored as a SOUND of the MP5’s 256 SOUNDs. The Common parameters can be stored as the initial settings in SOUND mode.
Zone parameters (Int)
Mode
Sound Selection
Damper Reso. (Int Piano only) String Reso. (Int Piano only) KeyOff Effect (Int Piano only) Voicing (Int Piano only)
Key Range Hi/Lo Velocity Switch On/Off Velocity Switch Value Velocity Compression Velocity Offset
Zone Transpose Volume
Pan
Fine Tune
Damper Pedal On/Off/Hold Footswitch On/Off Expression Pedal On/Off Modulation On/Off Bender On/Off
Bender Range
Solo On/Off
Solo Mode
Zone parameters (Ext) | Common parameters |
Mode | Master Volume |
TX Channel | Left Pedal Mode |
TX PRG # On/Off | M.Wheel CC# |
PRG # | Expression Pedal CC# |
TX Bank On/Off | Footswitch CC# |
Bank Select MSB LSB | Temperament |
Keyboard On/Off | Stretch Tuning |
Key Range Hi/Lo |
|
Velocity Switch On/Off |
|
Velocity Switch Value |
|
Velocity Compression |
|
Velocity Offset |
|
Zone Transpose |
|
TX Volume On/Off |
|
Volume |
|
TX Controller On/Off |
|
Pan |
|
Fine Tune |
|
Damper Pedal On/Off |
|
Footswitch On/Off |
|
Expression Pedal On/Off |
|
Modulation On/Off |
|
Bender On/Off |
|
TX Bender Range On/Off |
|
Bender Range |
|
Solo On/Off |
|
Solo Mode |
|
Caution:
The edited settings will be erased when the power is turned off, or other sound is recalled. To save these settings, use the STORE procedure to save them as a SETUP. (see page43)
32