In Sound mode, the “1” in the display indicates that the zone 1 is currently selected.
When the multitimbre is off, the default settings of the zones are as follows. It is recomended for simple MIDI transmit/receive use on stage etc.
The default TXchannel is System Ch (see page45).
Zone 1 | Internal | On | (Plays internal sound) |
Zone 2 | Internal | Off | (Muted) |
Zone 3 | External | On | (Plays external device) |
Zone 4 | External | Off | (Muted) |
When the multitimbre is on, the default settings of the zones are as follows. It is recomended for recording/playback with PC or sequencer.
The default TXchannel is System Ch (see page45).
The system channel mode is Panel:
Zone 1 | Both | On | (Plays internal sound & external device) |
Zone 2 | int | Off | (Muted) |
Zone 3 | int | Off | (Muted) |
Zone 4 | int | Off | (Muted) |
The system channel mode is Normal: | |||
Zone 1 | Both | On | (Plays internal sound & external device) |
Zone 2 | Both | Off | (Muted) |
Zone 3 | Both | Off | (Muted) |
Zone 4 | Both | Off | (Muted) |
The zone mode for each zone is indicated by the INT/EXT LED beside the faders. The zone status for each zone is indicated by the ZONE ON/OFF buttons. If the ZONE buttons is red, this zone is assigned to the entire keyrange of the MP5. If the button is green, the key range for that zone is less than the entire key range. You can check the key range setting by holding the SELECT button for the zone for 1 second.
16
