5. Control Knobs
Select the function with the buttons on the left and use the knobs to change the values. You can also move the cursor with the MENU buttons and change the value with the VALUE buttons while the display is showing Control Knobs function.
5.1 EFFECT
Make sure that the EFFECT button in the CONTROL KNOBS section is lit. If the
EFFECT button is turned off, press it to turn it ON.
The CONTROL KNOBS are now active and assigned to the EFX/REVERB parameters for the selected zone. Use the CONTROL KNOBS to change the current settings.
EfR (EFX Rate) adjusts the value of the preset parameter for each EFX. (internal only)
EfD (EFX Depth) adjusts the depth of the EFX added to the sound. RvT (REVERB Time) adjusts the reverb time. (internal only)
RvD (REVERB Depth) adjusts the depth of the reverb added to the sound.
EFX parameter list
|
| EFX Rate | EFX Depth | ||
1. | CHORUS | rate | 0 | send level | |
2. | FLANGER | rate | 0 | send level | |
3. | CELESTE | rate | 0 | send level | |
4. | ENSEMBLE | rate | 0 | send level | |
5. | DELAY 1 | delay time | 0 |
| send level |
6. | DELAY 2 | delay time | 0 | send level | |
7. | DELAY 3 | delay time | 0 | send level | |
8. | DELAY 4 | delay time | 0 | send level | |
9. | AUTO PAN 1 | rate | 0 |
| wet balance |
10. | AUTO PAN 2 | rate | 0 | wet balance | |
11. | AUTO PAN 3 | rate | 0 | wet balance | |
12. | TREMOLO 1 | rate | 0 | wet balance | |
13. | TREMOLO 2 | rate | 0 | wet balance | |
14. | TREMOLO 3 | rate | 0 | wet balance | |
15. | PHASER 1 | rate | 0 | wet balance | |
16. | PHASER 2 | rate | 0 | wet balance | |
27
