Kawai manual Using the MP5 as a Midi controller, Midi Connection, Selecting the Midi Channel

The display shows the current TRANSPOSE amount when the TRANSPOSE button is held down. A value of “0” indicates no transposition.

2.8 Using the MP5 as a MIDI controller

The MP5 can control external devices via MIDI.

MIDI Connection

Connect the MIDI OUT on the MP5 to the MIDI IN on an external MIDI device with a MIDI cable.

Selecting the MIDI Channel

The MIDI Transmit Channel of the MP5 must be matched with the Receive Channel of any MIDI devices connected to the MP5.

Select zone 3 by pressing the ZONE SELECT button 3. (Zone 3 is set to external as default setting.)

Press the MENU-UP button until “TX Channel” (Transmit Channel) appears on the display.

Use the VALUE buttons to choose a MIDI Transmit Channel from 1 to 16.

To exit from MENU, press the EXIT(SW) button.

Any notes played on the keyboard or any movements of the Knobs, sliders, etc. will be transmitted to any external MIDI devices connected to the MIDI out of the MP5 on the selected MIDI channel.

Sending Program Change Number

The MP5 can send MIDI program change numbers from 1 to 256 and Bank number LSB from 0 to 1 in SOUND mode. Simply press the SOUND SELECT buttons and the corresponding program number will be transmitted. See the program number table below.

19