If You Have:

You Will Need to Buy:

Lint clogged drain

Drain protector, Part Number 367031

Selecting the proper location for your washer improves performance and minimizes noise and possible washer "walk."

Your washer can be installed in a basement, laundry room, closet, or recessed area. See "Drain System."

IMPORTANT: Do not install or store the washer where it will be exposed to the weather.

Proper installation is your responsibility.

You will need:

A water heater set to deliver 120°F (49°C) water to the washer.

A grounded electrical outlet located within 4 ft (1.2 m) of where the power cord is attached to the back of the washer. See "Electrical Requirements."

Hot and cold water faucets located within 3 ft (90 cm) of the hot and cold water fill valves, and water pressure of 20-100 psi (138-690 kPa) for best performance.

A level floor with a maximum slope of 1" (2.5 cm) under entire washer. Installing the washer on carpeting is not recommended.

A sturdy floor to support the washer weight (washer, water and load) of 315 Ibs (143 kgs).

Do not store or operate your washer in temperatures at or below 32°F (0°C). Some water can remain in the washer and can cause damage in low temperatures. See "Washer Care" for information on winterizing.

Installation Clearances

The location must be large enough to allow the washer lid to open fully.

Washer Dimensions

+

20 ==

(50.8cm)

431/2"

(110.5cm)

271/2"

_(69.9 cm)

*Most installations require a minimum 5" (12.7 cm) clearance behind the washer for inlet and drain hoses. See "Connect Drain Hose" and "Connect the Inlet Hoses."

Installation spacing for recessed area and closet installations

The following spacing dimensions are recommended for this washer. This washer has been tested for installation with spacing of 0" (0 cm) clearance on the sides. Recommended spacing should be considered for the following reasons:

Additional spacing should be considered for ease of installation and servicing.

Additional spacing should be considered on all sides of the washer to reduce noise transfer.

For closet installation with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilation openings are acceptable.

Companion appliance spacing should also be considered.

"_f 3"*

(7.6crn)

#

-N_I _ 3"*

(7.6cm)

-T

C

A. Front view

B. Side view

C. Closet door with vents

*Required spacing

The washer can be installed using the standpipe drain system (floor or wall), the laundry tub drain system, or the floor drain system. Select the drain hose installation method you need. See "Tools and Parts."

Standpipe drain system--wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of 2" (5 cm). The minimum carry-away capacity can be no less than 17 gal. (64 L) per minute. A 2" (5 cm) diameter to 1" (2.5 cm) diameter standpipe adapter kit is available. See "Tools and Parts."

The top of the standpipe must be at least 39" (99 cm) high and no higher than 96" (244 cm) from the bottom of the washer.

39 It

(99 ore}

AB

Laundry tub drain system (view C)

The laundry tub needs a minimum 20 gal. (76 L) capacity. The top of the laundry tub must be at least 39" (99 cm) above the floor and no higher than 96" (244 cm) from the bottom of the washer.

5

Page 5
Image 5
Kenmore 110.2806 manual Standpipe drain system--wall or floor views a & B, Laundry tub drain system view C, You will need

110.2807, 110.2806 specifications

The Kenmore 110.2806 and 110.2807 are part of Kenmore's widely recognized line of top-load washing machines, designed to deliver reliable performance and user-friendly features. These models stand out with their robust construction, making them a popular choice among homeowners seeking efficient laundry solutions.

One significant feature of both the 110.2806 and 110.2807 is their large capacity, accommodating a variety of load sizes from small, delicate items to bulky bedding. The spacious interior reduces the number of loads needed, saving time and energy. With a focus on efficiency, both models boast multiple wash cycles and temperature settings, allowing users to customize their laundry experience. Options cater to various fabric types and soil levels, ensuring optimal cleaning for any item.

In terms of technology, Kenmore washers are equipped with a dependable and straightforward mechanical control system, offering ease of use for all ages. This intuitive interface allows users to easily select their desired cycle and settings without any complexity. Both models feature the agitator wash system, which ensures thorough agitation for an effective and deep clean.

Energy efficiency is another important aspect, and Kenmore has incorporated features that optimize water usage. Both the 110.2806 and 110.2807 are designed to minimize water consumption while delivering excellent wash results. This is not only environmentally friendly but can also contribute to lower utility bills.

Durability and construction quality are evident in both machines, with solid materials that withstand the rigors of daily use. The stainless-steel wash basket resists chipping and snagging, offering a long lifespan for the appliance. Additionally, the machines are engineered to operate quietly, maintaining a peaceful home environment.

Routine maintenance is made easy with a lint filter designed for quick access, ensuring that users can keep the washer in top condition with minimal effort. Moreover, these models feature a standard spin speed that efficiently removes water from clothes, reducing drying time and further enhancing energy savings.

In summary, the Kenmore 110.2806 and 110.2807 washing machines exemplify practicality, efficiency, and ease of use. With their sizable capacity, multiple wash settings, energy-saving features, and robust construction, they are ideal options for families and individuals alike, making laundry day a more manageable task.