Kenmore 153.33262 Materials Needed, Basic Tools, Additional Tools Needed When Sweat Soldering

MATERIALS NEEDED

To simplify the installation Sears has available the installation parts shown below. You may or may not need all of these materials, depending on your type of installation.

EXPANSION TANKS FOR THERMAL EXPANSION CONDITIONS AVAILABLE

IN 2 GALLONS

(7.6 LITERS) AND

5 GALLONS (18.9 LITERS) CAPACITY THROUGH LOCAL SEARS STORE

OR SERVICE CENTER.

WATER HEATER INSTALLATION KIT

WITH FLEXIBLE CONNECTORS FOR 3/4"

(19.05 mm) COPPER PLUMBING AND FLEXIBLE GAS CONNECTOR WITH FITTINGS.

METAL DRAIN PANS AVAILABLE

IN 20" (508 mm) DIAMETER

FOR WATER HEATERS HAVING

A DIAMETER 18" (457 mm) OR LESS, 24" (610mm) DIAMETER FOR WATER HEATERS HAVING A

DIAMETER 22" (559 mm) OR LESS AND AVAILABLE IN 28" (711 mm)

DIAMETER FOR WATER HEATERS

HAVING A DIAMETER 26" (660 mm)

OR LESS.

BASIC TOOLS

You may or may not need all these tools, depending on your

type of installation. These tools can be purchased at your local Sears Store.

•Pipe Wrenches (2) 14" (356 mm)

•Screwdriver

•Tin Snips

•6'(1.82 m) Tape or Folding Ruler

•Garden Hose

•Drill

• Pipe Dope or Teflon Tape			DRILL
SLOT-HEAD	SCREWDRIVER
		J	TIN SNIPS
PHILLIPS	SCREWDRIVER

		PIPE DOPE
ROLL OF TEFLON		(SQUEEZE TUBE)
TAPE	(USE ONLY ON	USE FOR WATER AND GAS
		CONNECTIONS
WATER	CONNECTIONS)

GARDEN HOSE 6 FOOT TAPE PIPE WRENCH

ADDITIONAL TOOLS NEEDED

WHEN SWEAT SOLDERING

•Tubing Cutters or Hacksaw

•Propane Torch

•Soft Solder

•Solder Flux

•Emery Cloth

•Wire Brushes

PROPANE

TUBING CUTTER TORCH

	ROLLOF
HACKSAW	EMERY CLOTH

3/4" (19 mm) WIRE BRUSH
	ROLL OF LEAD-FREE	SOLDER
1/2" (13 mm) WIRE BRUSH	SOFTSOLDER	FLUX