Operating the SeffoC eanJng Oven coot nued
How to Denay Stari of Cleaning
Delay Start is setting the oven timer to start the clean cycle automatically at a later time than the present time of day NOTE: Before beginning, make sure the oven clock shows the correct time of day (See page 19 )
Quick Reminde
1.Prepare oven for cleaning
2.Touch CLEAN pad
3,
4. Touch STOP TIME pad
Time that appears is 4 hours later than the time of day Press increase pad until the Stop Time you desire appears in the display The
Here's an example: Let's say it's 7:00 and you want the oven to begin
Step 1: Follow steps on page 29 ("Before a Clean Cycle") to prepare the oven for cleaning.
Step 2: Close the oven door and slide latch han-
dle to the right as far as it will go
Step 3: Touch | CLEAN | pad_ | " | " | |
appears | in display | and | "CLEAN | TIME" |
|
flashes.. |
|
|
|
|
|
Step 4: Touch INCREASE pad Four
hours is automatically programmed for Clean Time..
Step 5: If a longer or shorter Clean Time is desired, press & hold or tap INCREASE or DECREASE pad until desired clean time is displayed° (Tap to change time 5 minutes a tap. Press & hold to change time 10 minutes at a time.)
You can change the Clean Time to anywhere between
2 and 4 hours depending on how dirty the oven is. In this example, 4 hours is already set for the cleaning time
Step 6: Touch STOP TIME pad. "11:00" appears on display and "STOP TIME"
flashes The control automatically sets Stop Time by adding the Clean Time to the time of day In this example, the time
of day is 7:00 and the Clean Time is 4 hours Adding 4 hours to the time of day equals 1! :00
Step 7: Change Stop Time from 11:00 to 12:00 by pressing the INCREASE pad until "t2:00" appears in the display.. The words "DELAY CLEAN" will also appear in the display..
The
When the oven heats to a high temperature, the word "LOCK" will be displayed and, a short time later, the door latch handle will be locked in position.. It will not be possible to open the oven door until the tempera- ture drops below the lock temperature..
When the clean cycle is finished, the word "CLEAN" wilt go out in the display and the oven wil! begin to cool. When the oven temperature has fallen below the
locking temperature (about
Step 8: When the LOCK light is off, slide latch han- dle to the left as far as it
will go and open the door..
Never force the latch handle° Wait until the word "LOCK" goes out in the display. Forcing the latch handle may damage the door lock.
Afte a CQean Cycae
After a clean cycle, you may notice some white ash in the oven Just wipe it up with a damp cloth.
if white spots remain, remove them with a
if the oven is not clean after one clean cycle, the cycle may be repeated
3O