Kenmore 73819, 73511, 73515, 73811 manual est edition ManufacturedHomeSites, Communities

Usage Situations Where Appliance Power Cord Will Be Disconnected FREQUENTLY:

Do not use an adapter plug in these situations because disconnecting of the power cord places unduestrainonthe adapterandleadsto eventualfail- ure of the adapter ground terminal, The customer shouldhave the two-prongwall receptaclereplaced with a three-prong(grounding)receptacleby a quali- fiedelectricianbeforeusingtheappliance,

The installationof appliances designed for mobile homeinstallationmustconformwiththe Manufactured

Home Constructionand Safety Standard, Title 24 CFR, Part 3280 (formerlythe Federal Standardfor MobileHomeConstructionandSafety,Title24,HUD,

Part 280) or, when such standardis not applicable, theStandardfor ManufacturedHomeInstallations,lat-

est edition (ManufacturedHomeSites, Communities

and Set-Ups),ANSI A225 t, latest edition, or with localcodes

Quality of Flames:

The combustion quality of burner flames needs to be determined visually

(A) Yellow flames-- Call for service

(B) Yellow tips on outer cones-- Normal for LP gas

(C) Soft blue flames-- Normal for natural gas

Electrical Disconnect

1. Locate disconnect

plug at left rear of burner box on the

range back,.

2.Pinch sides of con- nector and pull out of range back.

$2e 4

Sea the Openings

Seal any openings in the wall behind the range and in the floor under the range when hookups are completed.

Check Ugnition of Surface Burners

Operation of all cooktop and oven burners should be checked after range and gas supply lines have been carefully checked for leaks,

Push in one of the surface burner controls and turn it to the LITE position. You will hear a snapping sound indicating proper operation of the spark module. Once the air has been purged from the supply lines, burners should light within 4 seconds. After burner lights,

rotate knob out of the LITE position. Try each burner in succession until all burners have been checked.

•If burner flames look like (A), call for service° Normal burner flames should look like (B) or (C), depending on the type of gas you use

. With LP gas, some yellow tipping on outer cones is normal°

Check Bgnition of Oven Burner

Your oven is designed to operate quietly and automati- cally To operate the oven, touch BAKE pad and then touch iNCREASE pad until "350 °''appears in the dis- play After 30-60 seconds, the oven burner will ignite and burn until the set temperature is reached. The oven burner will continue to cycle on and off as necessary to maintain the oven at the temperature indicated by the display.

The oven requires electrical power to operate., The oven cannot be lit during a power outage. Gas wilt not flow unless the glow bar is hot.

tf the oven is in use when a power outage occurs, the oven burner will shut off and cannot be re-lit until power is restored