Kenmore 790.3671 manual Setting Oven Controls, INSTRUCTiONS, Instructions Press Display

Setting Oven Controls (con't)

Setting Oven Lockout Feature

The _ pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and

v

prevents the Oven from being turned ON. it does not disable the clock, Kitchen Timer or the interior oven lights.

			iNSTRUCTiONS			PRESS	DISPLAY
To activate the Oven Lockout feature
t.	Press	and hold _	for 3 seconds	(Figure	t ).	for 3
		v				seconds
2.	After	3 seconds	"LOC" will appear,	a beep	will sound and		Figure 1

"DOOR LOCKED" will flash in the display. Once the oven door is locked the "DOOR LOCKED" indicator will stop flashing and remain on along with the "LOC".

To reactivate normal oven operation:

t. Press and hold _ for 3 seconds. A beep will sound. The

"DOOR LOCKED" will flash in the display until the oven door has completely unlocked and "LOC" has cleared (figure 2).

2.The appliance is again fully operational.

for 3

seconds

Figure 2

Setting Silent Control Operation

The DELAY START _ and FLEX CLEAN _'FL_FXN)pads control the Silent Control operation feature. The Silent Control

operation feature allows the oven control to be operated without sounds or beeps whenever necessary, if desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

INSTRUCTIONS PRESS DISPLAY

To change control from normal sound operation to silent control operation

1.	To tell if your	range is set for normal		or silent	operation		press	Figure	3
	and hold _	for 7 seconds.	"0:00"	will appear		and
	"DELAY" will flash in the display		(Figure 3).		After	7 seconds		for 7 seconds
	":SP" will appear in the display (Figure 4).
2.	Press _	to switch between	normal sound operation				and	Figure	4
	v

silent operation mode. The display will show either ":SP" (Figure 4) or ":--" (Figure 5).

If ":SP" appears (Figure 4), the control will operate with normal sounds and beeps. If ":- -" appears (Figure 5), the control is in

Figure 5

the silent operation mode.

3.Press _A_ to accept the change or press _ to reject the change.

19