Kenmore 790.367 < or, Self=Cleaning contd, Adjusting Oven Temperature, Instructions, Press, lower

Self=Cleaning (cont'd)

INSTRUCTIONS PRESS DISPLAY

Stopping or Interrupting a Self=Cleaning Cycle

if it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven:

1. Press @. Figure 1

2.Once the oven has cooled down for approximately 1 HOUR and the "DOOR", "LOCKED" icon is no longer displayed, the oven door can be opened (Figure 1).

iMPORTANT NOTES when using the Self-Clean feature:

t.A Self-Clean cycle cannot be started if Oven Lockout feature is active.

2.If a Self-Clean cycle has started but not finished and a power failure occurs, the appliance may not have thoroughly cleaned. Once power is restored, set for another Self-Clean cycle to finish.

3, If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12 hours in advance. To set for Delay Self-Clean 12-24 hours in advance see instructions to set the control for the 24 hour time of day display mode.

Adjusting Oven Temperature

The temperature in the oven has been preset at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is cooking too hot or too cool for the temperature you select, you can adjust the actual oven temperature to be more or less than what is displayed. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed.

				INSTRUCTIONS							PRESS
To adjust		the oven temperature				higher
t.	Press	_-_	for 6 seconds		(Figure 2). 0° will appear in the display
	(Figure2).										Q@
2.	To increase		the temperature		use the number			pads to enter the
	desired change.			(Example	30°F) (_		_--'0_(Figure 3). The
	temperature may be increased as much as 35°F (19°C).										< or
3.	Press	_	to accept the temperature				change and the display			will	@
	return	to the time		of day (Figure 4). Press _				to reject	the change
	if necessary.
To adjust		the oven temperature				lower
1.	Press	(_	for 6 seconds.		0° will appear in the display				(Figure	2).	qb@
2.	To decrease		the temperature use the number					pads to enter the
	desired change.			(Example	-30°F) (_		@	and then	press		@
		(Figure 5). The temperature may be decreased as much as
	35°F (19°0).										< or
3.	Press	(_	to accept the temperature				change and the display			will
											@
	return	to the time		of day (Figure 4). Press _				to reject	the change
	if necessary.

Note: The oven

temperature adjustments made with this feature

will not change the Self- Clean cycle temperature.

DISPLAY

Figure 2

Figure 3

Figure 4

Figure 5

38