Kenmore 790.367 General Care & Cleaning contd, Cleaning the Cooktop, Burner Heads, Caps & Grates

Models: 790.3671 790.367

1 46
Download 46 pages 51.78 Kb
Page 40
Image 40
General Care & Cleaning (cont'd)

General Care & Cleaning (cont'd)

Cleaning the Cooktop, Burner Heads, Caps & Grates

The cooktop is designed to make cleaning easier. Because the gas Burners are sealed, cleanups are easy when spillovers are cleaned up immediately.

The cooktop, Burner Heads and Caps should be routinely cleaned. Keeping the Burner Head Ports clean will prevent improper ignition and an uneven flame. Refer to the following instructions:

THE COOKTOP iS NOT REMOVABLE. Do not attempt to remove or lift the cooktop.

THE FIXED OVEN VENT iS NOT REMOVABLE. Do not attempt to remove the fixed oven vent cover.

Use caution when replacing the Burner Caps so the Electrodes are not damaged. This may cause a delayed ignition or prevent the burner from igniting.

Surface

Burner

Grate

Orifice holder

To Remove and Replace the Surface Burner Caps and Burner Heads- Remove in the following order: (t st) surface Burner Grates, (2nd) Burner Caps and (3rd) Burner Heads. Replace in the following order: Burner Heads, Burner Caps and Burner Grates.

PLEASE NOTE: The Bridge Burner Head is not removable (Ceramic Glass Cooktop models only).

Do not remove any parts from the cooktop until they have completely cooled and are safe to handle. Do not operate the surface Burners without

Surface the Burner Caps and Burner Heads properly in place.

To Clean the surface Burner Caps and Burner Heads (all models)- Use a soap-filled scouring pad or a mild abrasive cleanser to clean the surface Burner Caps and Burner Heads. The ports (or slots) around the Burner Heads must be routinely cleaned. If residue still remains in these ports, use a small-gauge wire or needle to clean the slots or holes. For proper flow of gas and ignition of the burner--DO NOT ALLOW SPILLS, FOOD, CLEANING AGENTS OR ANY OTHER MATERIAL TO ENTER THE GAS ORiFiCE HOLDER OPENING. ALWAYS keep the surface Burner Caps and Burner Heads in place whenever the gas Burners are in use.

Figure 1

To Clean the Burner Grates (all models)- The Burner Grates are dishwasher

safe and may be cleaned in the dishwasher. Remove any excessive soils before

 

 

placing in the dishwasher.

 

To Clean the Cooktop and contoured areas of the cooktop (for models with

 

Porcelain Cooktop only)- If a spill occurs on the porcelain cooktop, blot up spill

 

with an absorbent cloth. Rinse with a clean, damp cloth and wipe dry. Do not use

 

harsh abrasive cleaners on the cooktop. They can scratch the porcelain.

 

Completely rinse any mild cleaners used from the surface or the porcelain

 

cooktop may become damaged during future heating. DO NOT use spray oven

 

cleaners on the cooktop.

 

To Clean the Ceramic Glass Cooktop (for models with Ceramic Glass

 

Cooktop only)- See Ceramic Glass Cooktop Cleaning & Maintenance later in

 

this section.

4O

Page 40
Image 40
Kenmore 790.3671 manual General Care & Cleaning contd, Cleaning the Cooktop, Burner Heads, Caps & Grates