Kenmore 790.7937, 790.7936 Setting Silent Control Operation, Saving and Recalling Recipe Settings

Setting Oven Controls

•Silent Control Operation

•Saving & Recalling Recipe Settings

Setting Silent Control Operation

The DELAY START @ and FLEX CLEAN @ pads control the Silent Control operation feature. The Silent Control

operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

INSTRUCTIONS PRESS DISPLAY

To change control from normal sound operation to silent control operation:

1.To tell if your range is set for normal or silent operation press

and hold _SDTEYforAR7_seconds'T		. "0:00" will appear		and "DELAY"	for 7seconds
	V
will flash in the display (Fig. 1).					@	Fig. 1
2. Press _CFLL_toAXNswitch between normal sound operation and
V
silent operation mode. The display will show either ":SP" (Fig. 2)
or ":--" (Fig. 3).
If ":SP" appears (Fig. 2), the control			will operate	with normal		Fig. 2
sounds and beeps, tf ":- -" appears (Fig.3), the control is in the
silent operation mode.
A
Press _	to accept the change		or press _	to reject the		Fig. 3

change.

Saving and Recalling Recipe Settings

The Recipe Recall feature may be used to record and recall your favorite recipe settings. This feature may store 1 setting

for each of the basic		cooking pads. The pads that a recipe may be stored with are BAKE _,				CONV BAKE @,
MEATS @,	CAKES _		& BREADS	_.	To store a recipe, start your recipe with one of the pads listed. When
using the (_	pad	to start cooking, press		and	hold the START pad for 6 seconds. When	the 2nd beep sounds, release

the START pad. The 2nd beep indicates the the recipe has been stored correctly. To store a new recipe over the old stored recipe, set up the recipe as you normally would and save by holding the START pad until the 2nd beeps sounds. The recipe will be saved and the oven will start with the new recipe.

NOTES:
1. Pressing the (_	pad when entering cooking temperatures		and times will start the oven. If you wish to store the
recipes but not start the oven press _		after pressing the (_	pad.

2.Once a recipe has been stored with any of the 5 basic cooking pads listed above, the recipe information will appear in the display when pressing the pad in the future.

3.Should a recipe be needed that is different from the currently stored recipe, but do not wish to loose the old stored

recipe, override with the new time and temperature settings and press (do not hold) the (_ pad once.

20