Kenmore 790.7937, 790.7936 manual When the Self-Clean cycle is done

Self-Cleaning

•Setting Flex Clean

•Setting Delay Flex Clean

INSTRUCTIONS PRESS DISPLAY

When the Self-Clean cycle is done:

1.The time of day,"DOOR LOCKED" and "CLEAN" icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened.

Stopping or Interrupting a Self-Cleaning cycle:

If it becomes necessary to stop or interrupt a Self-Cleaning cycle due to excessive smoke or fire in the oven:

.	Press _.	@
2. Once the oven has cooled down for approximately 1 HOUR and
	the "DOOR LOCKED" icon is no longer displayed ,the oven door	Fig.7
	can then be opened (Fig. 7).

IMPORTANT NOTES when using the Self-Cleaning feature:

1.A Self-Cleaning cycle cannot be started if the Oven Lockout feature is active.

2.If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may not have thoroughly cleaned. Once power is restored, set for another Self-Cleaning cycle to finish.

3.If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12 hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 17 for instructions to set the control for the 24 hour time of day display mode.

34