Kenmore DU850DWG, DU910PFG, DU890DWG, DU920PFG Servicing the Vertical Water Tube, Component Access

COMPONENT ACCESS

Servicing the Vertical Water Tube

The vertical water tube in these models delivers water to the spray arm mounted underneath the upper dish rack and a smaller spray arm mounted at the top of the dishwasher tub. (Fig. 3-4)

If the pump and motor assembly must be removed for servicing, the vertical water tube must be disconnected from the pump cover as follows:

1.Remove the upper dish rack.

2.Dislodge the upper portion of the vertical water tube from the plastic knob on the back of the tub by pressing down on the nozzle. (Fig. 3-5)

Securing

Tab

Fig. 3-4

3.Pull the securing tabs of the clamp holding the internal water feed tube to the pump outlet nozzle and remove the clamp. (Fig. 3-6)

4.Rotate the lower end of the tube either left or right off the pump nozzle. (Fig. 3-7)

Securing

Clamp

	PULL
PULL	Securing
	Tab
Securing	Internal
Tab	Water
	Tube
	Fig. 3-6

PUSH

DOWN ON

NOZZLE

Fig. 3-5

Fig. 3-7

-- NOTE --

Do not pull the vertical water tube forward or up in an attempt to remove it from the pump nozzle.

The smaller spray arm at the top of the tub does not need to be removed

to service the pump and motor assembly.

44