Connecting the System

Connecting the speakers

Align the speaker with the main unit so the protrusions in the main unit enter the installation holes of the speaker.

From the front of the speaker, move it as indicated by the arrow.

Replacing the speaker cords

If you want to use the speakers while they are detached from the main unit and the speaker cords are too short, you can replace the supplied cords with the following type of commercially available speaker cords: AWG24-18 (Conductor Diameter: 0.511 mm - 1.024 mm).

Strip about 1 cm of the vinyl insulation from the tips of both ends of the replacement speaker cords, twist the ends of the wires together so they do not unravel when you connect them.

Preparing the ends of the speaker cords

Twist the plastic sleeve on the end of the cord as you pull it off.

Connecting the speaker cords

1

2

3

Notes on connecting the

Never short-circuit the positive (+) and negative (–) ends of the speaker cords.

speaker cords

(Do not touch the + and – cords together.) Mistakenly reversing the positive and negative polarity will result in unnatural and unclear sound.

English 15