D.AUDIO
Recording to a Digital Audio Player
This section explains how to record from a variety of different sources to a Kenwood digital audio player. You also can configure the digital audio player to detect silence and divide the recording into tracks automatically.
zAlways turn this system and the digital audio player off before connecting the digital
audio player.
z Refer to the instruction manual that comes with the digital audio player you are connecting also.
z The following assumes that the source device is already connected to the system.
Compatible Kenwood digital audio players (As of November 2007)
Memory audio player | M2GC7, M1GC7 |
|
|
1 Connect the digital audio player to the [REC OUT] terminal on the rear panel of the main unit.
2Select the input source.
Press the [CDE], [USBE], [iPodE], [TUNER/band], [INPUT SEL.] (main unit only), or [D.AUDIOE] (remote control only) key.
52