Related functions that
may also be helpful
CD
zSupported Media RPage 24
Related | z Audio Settings RPage 63 onwards |
Information z Selecting Track Program Playback Mode RPage 39 | |
z Cautions when loading a CD
– A CD cannot be loaded while the system is in Standby mode.
– Do not try to force a CD into the inlet slot while the system is in Standby mode. Doing so can cause malfunction.
|
| – If you experience problems loading a CD, pull it out and then |
|
| – Do not touch the playing surface of the disc. |
|
| – Use of an 8 cm CD adapter is not supported. |
|
| – If you insert an 8 cm CD so it is off center relative to the inlet slot, it will not slide |
|
| all the way into the slot. Take care when using an 8 cm CD. |
|
| – If a CD is already loaded, opening the slide door will eject it. |
| Removing a CD | |
1 |
|
|
| Press the [F] key to stop playback. | |
2 |
|
|
| Slide the slide door cover towards the back panel to eject | |
|
| the CD. |
Sliding the slide door will eject the CD.
zIf the CD is playing when you slide the slide door to the back panel, playback
will stop and the CD will be ejected.
3Slide the slide door towards the front panel to close it.
z A CD cannot be ejected while the system is in Standby mode.
z Ejecting a CD deletes all program playback settings. (Page 39)
English 31
How to Use This Manual
Operation icons
Explains the procedure for CDs.
Explains the procedures for USB devices.
Explains the procedure for the radio.
Explains the procedure for digital audio players.
Explains the procedures for iPods.
Explains the procedures for external components.
Explains how to set the sound quality.
Explains how to set up component units.
Explains how to carry out system maintenance.
Explanations of remote control procedures
Explanations of main unit procedures
Supplementary information
about procedures
English 7