External Components
This section explains how to connect external components to the system and play back tracks.
Playback from External Components
Connect the external component to the system as described in <Connecting Other (Commercially Available) Devices> (page 17).
zWhen connecting external components, always turn this system and the external components off beforehand.
zAlso refer to the instruction manual that comes with the external component being connected.
1 Connect the external component to the [AUX IN] terminal on the back panel of the main unit.
Audio OUT
2 Select AUX as the source.
Press the [AUX] key.
Press the [INPUT SEL.] key.
The source changes as shown below each time you press the key.
AUX | D. AUDIO |
3Begin playback on the connected external component.
Perform the required operation on the connected external component to start playback.
60