Component Names and Functions

Using the remote control

After plugging the main unit into an AC wall outlet, press the power [K] key on the remote control unit

to turn the system on. After the system powers up, press the key for the

function you want to use.

Point the remote control at the remote sensor when

using it.

Approx. 6 m

15° 15°

The remote control may not operate correctly if direct sunlight or light from a high-frequency fluorescent lamp (such as an inverter type) is shining on the remote sensor. If this happens, move the system to a different location to avoid this type of malfunction.

Loading the remote control batteries

The batteries supplied with the system are for operational testing and may last only for a short time.

1Remove the

2Load the R6-size

3Close the

battery cover.

batteries supplied with

battery cover.

 

the system.

 

CAUTION

Always replace the batteries with two new ones.

Check the polarity of the batteries (UV) when loading them.

Never heat or take apart the batteries, or put them in the fire or the water.

If batteries are not used correctly, they may burst or leak. This will cause a fire, injury to persons or damage to the surroundings.

English 21