Connecting the System
Connecting Other (Commercially Available) Devices
When connecting a related system component, read the instruction manual that comes with the component too.
Ensure that all the cords are securely connected. Loose or incomplete connections may result in noise interference or no sound at all.
Caution for outdoor antenna installation
Opening the front panel
Since antenna installation requires skill and experience, always consult your dealer before installation. The antenna should be located away from power lines. If the antenna falls over, contact with a power line creates the risk of electric shock.
To connect other devices to the front panel connectors of the main unit, raise the panel cover and then connect the devices.
Raise
Panel cover
D.AUDIO IN
Connect digital audio players to the [D.AUDIO IN] terminal on the front panel of the main unit.
If you connect a Kenwood player that supports digital audio link using the dedicated cable, you can control the
player from the main unit and the remote control. (Page
48) It can also be connected using a 3.5 mm stereo mini-Digital audio player plug cable (commercially available unit).
When you are not using the digital audio player, unplug the
USB
Connect USB flash memory or USB mass storage class compliant digital audio players to the [
USB] port on the front panel of the main unit.
Depending on the device being connected, it may take some time for the system to recognize it.
With some models, a USB connection mode selection screen will appear. Select “Storage Mode”.
16