Receiving Radio Broadcasts
This section explains how to listen to the FM/AM radio and set radio stations.
Listening to FM/AM Radio
Simply pressing the [TUNER/band] key turns on the system and allows you to listen to the radio.
1Select a reception mode.
Press the [TUNER/band] key.
The mode changes as shown below each time you press the key.
FM (Stereo) |
| FM (Monaural) |
| AM |
“ST.” is displayed while a stereo broadcast is being received in FM (Stereo) reception mode.
2 Select a station.
Choosing from preset stations (Preset Call)
Select a preset station.
You need to preset stations before you can perform these operations. (Page 44)
Selection with the [P.CALL] keys
Each press of the [<] or [>] key cycles sequentially through the preset stations.
Holding down the [<] or [>] key will scan sequentially through the preset stations at a
Selecting a preset station with the number keys
To select station P17, press the [1] key, press the [7] key, and then press the [ENTER] key.
To select station P23, press the [2] key, press the [3] key, and then press the [ENTER] key.
42