USB
This section explains how to connect USB flash memory or a USB mass storage class compliant digital audio player to the system and play its MP3 or WMA audio files.
Playing back from a USB device
This section explains how to play MP3 or WMA audio files from USB flash memory or a USB mass storage class compliant digital audio player.
zAlso refer to the instruction manual that comes with the USB device you are connecting.
1 Connect a USB flash memory or the cable of a USB audio player to the [
USB] port on the front panel of the main unit.
z Before connecting a USB device to the system, turn off both the system and the USB device.
2 Press the [USBE] key.
The system finds the MP3 and WMA audio files on the connected device and start playback.
z See page 38 for the playback sequence when there are multiple folders or audio files on the connected device.
zPlayback does not start if there are no playable MP3 or WMA audio files on the connected device.
z Depending on the connected device, the number of files, and other factors, reading of files can take some time.
z If you are using a Kenwood digital audio player, a USB | USB mode | |
connection mode selection screen may appear. Select | ||
| ||
“Storage Mode” and then press the [USBE] key again. | Storage | |
| ||
| Player | |
|
|
zDo not disconnect the USB device while playback is in progress. Doing so can cause malfunction.
zNever touch the USB device port with your fingers. Doing so can cause malfunction.
32