D.AUDIO
You can connect a Kenwood digital audio player (referred to hereafter simply as “digital audio player”) to the system and use it to play tracks.
Playing Back from a Digital Audio Player
Use this procedure to connect a digital audio player to the system and play tracks.
zAlso refer to the instruction manual that comes with the digital audio player you are connecting.
zConnecting the digital audio player using the dedicated cable allows you to operate the digital audio player using the main unit or the remote control.
Compatible Kenwood digital audio players (As of November 2007)
Memory audio player | M2GD55, M1GD55, M1GC7, M2GC7 |
1 Connect the digital audio player to the [D.AUDIO IN] terminal on the front panel of the main unit.
z Always turn this system and the digital audio player off before connecting the digital audio player.
2
3
Turn on the digital audio player.
Play back from a digital audio player.
Press the [D.AUDIOE] key.
zSimply pressing the [D.AUDIOE] key turns on the system and begins playback.
Press the [INPUT SEL.] key.
The source changes as shown below each time you press the key.
D.AUDIO 
AUX
48