Kenwood C-V750 1Activate the clock adjustment mode, 2Enter the hour, 3Enter the minute, A M ￿ 1 2:) ), A M ￿ ￿ 8:) ), A M ￿ ￿ 8:1 5￿, Clock adjustment, Displaying the Time

48

Clock adjustment

This unit incorporates a clock function. Be sure to adjust the correct time before using the timer function.

The time display blinks after a power failure or when the power cord has been unplugged from the AC outlet and plugged in again. In such a case, adjust the clock again.

C-V750 (En/T)

AV CONTROL CERTER KC-2

: Keys or controls to be used in this operation

1Activate the clock adjustment mode.

Main unit

CLOCK 1 Press the CLOCK key.

2Enter the hour.

Main unit

	1
PTY SELECT
TUNING
To decrease	To increase
the figure	the figure

CLOCK 2 Press the CLOCK key.

3Enter the minute.

Main unit

	1
PTY SELECT
TUNING
To decrease	To increase
the figure	the figure
CLOCK	2 Press the CLOCK key.

Displaying the Time

	GRC
	Main Menu
The displayed information	ENTER
can be switched every
time the Display icon is	Main Menu
selected.
	ENTER

Display

Example: Adjustment to 8:15A M ￿ 1 2:) )

ÖThe time display starts to blink.

A M ￿ ￿ 8:) )

ÖThe time is represented in 12-hour AM/PM method.

ÖPress the CLOCK key. The hour is entered and the minute display starts to blink.

A M ￿ ￿ 8:1 5￿

ÖIf you make a mistake, restart from the beginning.

ÖTo adjust correct time, press the CLOCK key at the same moment as a time announcement.

Each press switches the indication.

1 Input selection display2DOLBY/DSP/STEREO display3 Clock display (about 5 seconds)

8 9;) )￿MHz P R O L O G I C A M ￿ ￿ 8:1￿ 7

ENTER