Two
In each of TIMER 1 and TIMER 2, the timer data including the operating period and played contents can be set and selected to be activated or not as required.
Timer reservation is possible for the two types TIMER 1 and TIMER 2 at the same time.
ÖPlease make reservations with an interval of at least one minute, so that the operation times of TIMER 1 and TIMER 2 do not overlap.
1
Timer playback, timer recording (TIMER 1, TIMER 2)With each of the two timer programs, a selected source can be played (or radio broadcast can be recorded) in the previously set time period.
Sleep timerThe unit is put to STANDBY mode automatically after the specified
period has elapsed. | W |
1Make preparations for the play (recording).
| Ö To listen to radio | Ö To listen to CD | Ö To listen to tape | Ö To listen to LD | Ö For broadcast |
|
|
|
| recordings |
| The station should be | Insert a disc. | Insert a tape. | Insert a disc. |
| preset before timer pro- | (Program playback is not pos- |
| (Program playback is not pos- |
| gramming. ¥» sible.) |
| sible.) | |
If tapes are inserted in both decks A and B, playback starts with the tape in deck B.
2Adjust the listening volume.
Main unit
VOLUME CONTROL
DOWNUP
ÖThe VOLUME CONTROL should be set to the desired volume while the unit is ON.
3Set the 
(ON/STANDBY) switch to STANDBY.
Main unit
ON/STANDBY
4Select a TIMER No.
Main unit
TIMER
MODE1
TIMER | 2 Press immediately after selection. | |
SET | ||
|
Each press of the key switches the TIMER numbers as follows.
| 1 TIMER 1 |
|
|
| 2 TIMER 2 |
| |
| 3 TIMER 1,2 |
| |
| 4 OFF | TIMER 1 | |
|
|
ÖThe selected TIMER No. lights.
ÖIf a previously programmed TIMER No. is selected, the contents will be replaced by the new contents programmed.
ÖThe timer programming operation is not possible when TIMER 1,2 have already been selected.