Kenwood C-V750 Connection of flat-cableconnector, 8About the system control connections, About the system control operations, POWER, Notes, Notes, CENTER, PLAYER, CONTROL

System connection

C-V750 (En/T)

8About the system control connections

When this unit is connected to KENWOOD audio component system “SERIES 21”, also connect them through the system control cords to allow system-control operations between components.

Connection example

AV	SYSTEM
	CONTROL
CONTROL
CENTER

System

POWER control cord

AMPLIFIER

SYSTEM

CONTROL

GRAPHICEQUALIZER

SYSTEM

CONTROLSystem

The SERIES 21 components which can be system-connected with this unit include the LD player, MD recorder and DVD player.

Notes

1.Do not connect the SERIES 21 components to other system components using system control cords.

2.Do not connect system control cords to any components other than those specified by KENWOOD. It may cause a malfunction and damage your equipment.

3.Be sure the system control plugs are in- serted all the way in to the system control terminals.

CASSETTE DECK

control cord

System

SYSTEMcontrol cord

CONTROL

CD

PLAYERAbout the system control operations

(Available operations when SERIES 21 components are connected through system control cords)

Remote Control

Lets you operate source components with the system remote supplied with this unit.

Automatic Operation

When you start playback from a source component, the input selector on this unit switches to that component automatically. (Except TAPE 2)

Synchronized Recording

Lets you synchronize recording with the start of playback when recording from CD, LD or MD.

Connection of flat-cable connector

Inserting the connector Removing the connector

Push in the connector straight into the socket until it clicks to indicate the locking.

Push and hold the two ends of the connector, and pull it straight outward.

1.Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.

2.When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging / unplugging

Notes connection cords without removal of the power cord can cause malfunctions or damage to the unit.

3.Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.

4.If the system control cords or audio cords are not connected properly, the remote control or automatic operation between system components will not work properly.