22
Preparations
ÖConnect components as described in “System connection”.
5
ÖComplete “Setup of the Graphical Remote Control (GRC) unit”.
@
AV CONTROL CERTER
: Keys or controls to be used in this operation
1Press the ON/STANDBY key to ON.
Main unit | GRC |
ON/STANDBY
ON/STANDBY
ÖLoad the CD player or cassette deck with the software to be played. \Read the instruction manuals of the associated components.
2Select the input source.
With the main unit operation, the input sources are switched as shown below.
Main unit | GRC |
INPUT
Main Menu
ENTER
1 VCR
2AUX3TAPE 1 / MD *14TUNER (frequency display)5 CD
6The selected source is displayed.
C D
ENTER
To enable | |
be set according to the actually connected components. | 0 |
|
|
Ö Note for using the 6ch INPUT | ° |
Ö Step 3 can be omitted if the easy operation feature is available. (
3Play the selected source.
Main unit | GRC |
| |
| CD | or TapeA | |
Operation on each | ENTER | ENTER | |
source component | |||
| |||
|
| ||
| ENTER | ENTER |
4Adjust the volume.
Main unit | GRC | ||
VOLUME CONTROL |
| ||
|
| To increase volume | |
|
| VOLUME | |
DOWN | UP | To decrease volume | |
To | To | ||
| |||
decrease | increase |
| |
volume | volume |
|
Pressing the play key of the CD player or cassette deck starts up the system automatically and starts playback. When this operation is
used, steps 1 and 2 can be omitted. | ( |
Volume level is displayed.
V O L U M E - 5 ) dBÖThe time taken till the volume level is displayed is variable depending on the current operating condition.
ÖRotating the VOLUME CONTROL at a higher speed increases the amount of volume change (AI VOLUME function).
ÖThe sound of input source cannot be listened to while TAPE 2 (MONITOR) is ON.