English

■When a unit equipped with an O-N switch is to be connected, please also see the instruction manual of this unit.

Set the O-N switch to "N". "N"-operation will be set.

■When a unit that is not equipped with an O-N switch, or the changer switching unit "KCA-S200" is connected, "O"- operation will be set.

NOTE

The CD text, Presetting Disc Names, and Disc Name Preset Play functions may not be operational depending on the unit.

Playing CDsPlay:

Press the CD OPEN/CLOSE button to slide open the front panel, showing the CD (insertion) slot. Holding the CD with the labeled side facing up, insert it in the slot. The control panel will be shown, and the CD will start playing.

The indicator will light when a CD has been inserted.

Playing CDs Already Inserted:

Press the SRC button repeatedly to select the CD mode. "CD" is displayed when the CD mode has been selected. The CD will start playing.

Pausing and Restarting CD Play:

Press the 38 button to make the disc pause.

Press the same button again to start play again.

Eject:

Press the CD OPEN/CLOSE button. The front panel will slide to eject the CD.

Press the CD OPEN/CLOSE button to show the control panel.

NOTE

When the CD cannot be ejected even if you press the CD

OPEN/CLOSE button, press this button for at least three seconds to eject the CD.

2CAUTION

•Do not attempt to insert a CD into the slot if another one is already there.

•The eject function will operate even if the CD OPEN/CLOSE button is pressed while no CD is loaded. Attempting to quickly insert a CD at this time may result in scratching the CD. Wait a short time before inserting a CD.

•When the front panel has been slid, it might interfere with the shift lever or something else. If this happens, pay attention to safety and move the shift lever or take an appropriate action, then operate the unit.

•Do not apply excessive force to the front panel after it slides.

•Do not use the unit with the front panel in the slid condition. Doing so will cause breakdown.

NOTE

When you load a CD and eject it right away, the next time you try to insert the CD may not load. In such a situation, take the CD out for a moment and then reinsert it.

— 14 —