Graphic Equalizer features

English

Spectrum Analyzer Display Selection

You can select the display to enjoy sounds with eyes.

Switching the Preset Spectrum Analyzer Display:

1Press the EQ button. "EQ CTRL" is displayed once the Graphic equalizer mode is entered.

2Press the DISP button.

The spectrum analyzer name currently set appears in the display.

3Each time you press the DISP button, the spectrum analyzer display switches as follows;

➨"Peak Hold" ➨ "Trump" ➨ "Aurora" ➨ "Falling Star" ➨ "Missile"

➨"Bird Wing" ➨ "Wave" ➨ "Heart Attack" ➨ "Source" ➨ "B-# / WH-#" (User setting) ➨

NOTE User setting

You can set the combination of the separate settings for the Blue and White analyzers as mentioned below.

If you switch the setting of them, it will be stored as a User setting.

•The "#" display indicates the setting value.

•The default setting is "B-scn / WH-scn". The preset spectrum analyzer display switches in sequence.

4Press the EQ button to end the Graphic equalizer mode.

Switching Only the Blue Analyzer Display:

1Press the EQ button. "EQ CTRL" is displayed once the Graphic equalizer mode is entered.

2Each time you press the button #5, the Blue analyzer display switches as follows;

➨"B-1" ➨ "B-2" ➨ "B-3" ➨ "B-4" ➨ "B-5" ➨ "B-6" ➨ "B-7" ➨ "B-8"

➨"B-scn" (scanning from "B-1" to "B-8" display) ➨ "B-off" (Off) ➨

NOTE

You cannot switch this display when the Preset Spectrum Analyzer is set to "Source".

3Press the EQ button to end the Graphic equalizer mode.

Switching Only the White Analyzer Display:

1Press the EQ button. "EQ CTRL" is displayed once the Graphic

equalizer mode is entered.

2Each time you press the button #6, the White analyzer display switches as follows;

➨ "WH-1" ➨ "WH-2" ➨ "WH-3" ➨ "WH-4" ➨ "WH-5" ➨ "WH-6" ➨ "WH-7" ➨ "WH-8" ➨ "WH-scn" (scanning from "WH-1" to "WH-8" display) ➨ "WH-off" (Off) ➨

NOTE

You cannot switch this display when the Preset Spectrum Analyzer is set to "Source".

3Press the EQ button to end the Graphic equalizer mode.

— 26 —