This function produces a beep sound that accompanies button operation. It can be switched on or off.
Display and setting ”BEEP On“ ”BEEP Off“2. Switching PreoutSwitch the preout between the rear and
”Preout Rear“: Rear preout
”Preout
NOTE
•Be sure to turn the power of this unit off and on after you switch the preout.
•When this function is set to "Preout
You can adjust the Dimmer level of the unit when your car's light switch has been turned on.
Display and setting ”BRIGHTNOTE
This function is available when the dimmer wire is connected and the light switch of your car is turned on.
Be sure to enter the function set mode again after you turn the light switch on, if the light switch is turned off.
4. Digital Crossover NetworkIf this function is set to on, you can adjust the setting of the Crossover network.
Display and setting
”D.X ‘over On“ ”D.X ‘over Off“
NOTE
When this function is set to on, functions from 1 to 8 in the section "Function items in Other mode:" are available to be controlled.
5. External Amp ControlIf this function is set to on, you can control the external amplifier.
Display and setting ”Amp Cont On“ ”Amp Cont Off“NOTE
When this function is set to on, the External AMP Control Setting function in the section "Function items in Other mode:" is available to be controlled.
6. Setting for the Display of the Model's Name when Turning the Power OnIf this function is se to on, the name of this unit appears in the display when the power is turned on.
It can be switched off, too.
Display and setting
”Opening On“
”Opening Off“
7. Security CodeWhen the battery is removed from the unit's power switch, you cannot turn on the unit again unless the preset security code is input. This function helps prevent theft.
See page 28
— 31 —