English
Troubleshooting Guide
Disc Control ModePROBLEM | POSSIBLE CAUSE | SOLUTION | ||
|
|
|
| |
The disc control mode cannot | No wire has been connected to the disc changer input | Connect the wire to the disc changer input terminal on the | ||
be selected. | terminal on the unit. | unit. | ||
|
|
|
| |
The specified disc does not | The specified CD is quite dirty. | Clean the CD. | ||
play, but another one plays |
|
|
| |
The CD is | Load the CD with the labeled side up. | |||
instead. | ||||
|
|
|
| |
| The disc is loaded in a different slot from that specified. | Eject the disc magazine and check the number for the | ||
|
| specified disc. | ||
|
|
|
| |
| The disc is severely scratched. | Try another disc instead. | ||
|
|
|
| |
The sound skips. | Something is touching the disc changer. | Remove whatever is touching it. | ||
|
|
|
| |
| The CD is scratched or dirty. | If skipping happens at the same place when the car is | ||
|
| stopped, something with the CD is wrong. Clean the CD. | ||
|
|
|
| |
The display shows that the | The computer chip in the unit is not functioning normally. | Press the reset button on the unit (see p. 4). | ||
changer is being played, but no |
|
|
| |
sound can be heard. |
|
|
| |
|
|
|
| |
The specified track will not | Random play or magazine random play has been selected. | Turn off random play or magazine random play. | ||
play. |
|
|
| |
|
|
|
|
•Even though the disc changer is connected, the Disc Changer Mode is not on, with "Aux Mode" showing in the display during the Changer Mode.
•Even though no device
The following messages are displayed when certain problems are occurring in your system. Take the recommended actions.
Eject | No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. |
| ]Load the disc magazine properly. |
No Disc | No disc has been loaded in the disc magazine. |
| ]Load a disc into the disc magazine. |
— 44 —