Function set system

English

Function items in Other mode:<In Tuner/CD/Cassette/External disc control mode>1. Frequency Setting of High Pass Filter for Front Output

You can select the frequency to be cut of the high pass filter for front output.

Display and setting

“HPF-F Off/30/60/90/120/150/180/250” (Hz)2. Frequency Setting of High Pass Filter for Rear OutputYou can select the frequency to be cut of the high pass filter for rear output.

Display and setting

“HPF-R Off/30/60/90/120/150/180/250” (Hz)
6. Time Alignment for Front OutputYou can adjust the delay of sounds from front output during using the DSP.

Display and setting

“T-Alg F OFF/0.5~18” (msec.)7. Time Alignment for Rear OutputYou can adjust the delay of sounds from rear output during using the DSP.

Display and setting

“T-Alg R OFF/0.5~18” (msec.)
3. Filter Slope Setting of High Pass FilterYou can select the filter slope of the high pass filter.

Display and setting

“HPF Slope 12/18/24” (dB/Octave)
8. Time Alignment for Non-fading OutputYou can adjust the delay of sounds from non-fading output during using the DSP.

Display and setting

“T-Alg NF OFF/0.5~18” (msec.)
4. Frequency Setting of Low Pass Filter for Non-fading Output

You can select the frequency to be cut of the low pass filter for non-fading output.

Display and setting

“LPF Off/150/120/100/80/60” (Hz)5. Filter Slope Setting of Low Pass FilterYou can select the filter slope of the low pass filter.

Display and setting

“LPF Slope 12/18/24” (dB/Octave)
9. External Amp Control SettingAdjust the bass boost level of the external amplifier using the main unit.

Display and setting

"Amp Cont 1": Bass boost level is flat."Amp Cont 2": Bass boost level is low. (+6 dB)"Amp Cont 3": Bass boost level is high. (+12 dB)

NOTE

As of December 1998, the power amplifiers controllable by the main unit are as follows: KAC-X501F/PS501F/X401M/PS401M/X301T/PS301T/X201T/PS201T

— 32 —