NOTE

•This adjustment cannot be made when the Sound Field Control is set to "Bypass".

•The default setting is "STEP 2".

4Press the DSP button to end the DSP control mode.

Compression Control Level Adjustment

This function can compress the dynamic range of music, so that low sounds which are covered over by road noise can be raised.

1Press the DSP button. "DSP CTRL" is displayed once the DSP control mode is entered.

The DSP indicator blinks during the DSP control mode.

2Each time you press the COMPRESSION button, the compression level switches as follows;

➨ "OFF" ➨ "STEP 1" (Compression level is lower) ➨ "STEP 2" ➨ "STEP 3" (Compression level is higher) ➨

NOTE

The default setting is "OFF".

3Press the DSP button to end the DSP control mode.

Position Setting

This function can set the DSP effects for various listening positions.

1Press the DSP button. "DSP CTRL" is displayed once the DSP control mode is entered.

The DSP indicator blinks during the DSP control mode.

2Press the POSITION button.

The position currently set appears in the display.

3Each time you press the POSITION button, the position switches as follows;

➨ "ALL" ➨ "Front-Right" ➨ "Front-Left" ➨ "Front" ➨ "Rear" ➨

NOTE

•Be sure to set the balance and fader control to center position. If their settings are not set to center position, the Position Setting effect will not be obtained properly.

•The default setting is "ALL".

4Press the DSP button to end the DSP control mode.

Room Size Setting

This function can set the DSP effects for various room sizes.

1Press the DSP button. "DSP CTRL" is displayed once the DSP control mode is entered.

The DSP indicator blinks during the DSP control mode.

2Press the ROOM SIZE button.

The position currently set appears in the display.

3Each time you press the 4 or ¢ button, the room size switches as follows;

"Large" (For large vans or RVs, etc.) j "Medium"(For sedans, etc.) j "Small" (For compact cars, etc.)

NOTE

•This adjustment cannot be made when the Position Setting is set to "ALL".

•The default setting is "Medium".

4Press the DSP button to end the DSP control mode.

— 23 —