Press the + button to turn the volume up.

Press the – button to turn the volume down.

•SRC button

Each time you press the SRC button, the mode switches as follows:

▼

Tuner mode

▼

Tape mode

▼

CD mode

▼

External disc control mode

▼

Standby mode

NOTE

•The mode switches to the next mode from any mode which cannot be used.

•The external disc control mode will differ depending on the unit that is connected.

•ATT button

Turns down the volume quickly. To return the volume to its original level, press the button again. Turning the volume all the way down also cancels attenuation.

• button

Each time you press this button, the panel slides one step at a time.

When the panel has been slid down completely, press this button to close the panel.

Tuner features

•Number/letter entry buttons

Press buttons #1-6 to recall preset stations.

During direct access tuning, use these buttons to input the frequency of the station.

Use to enter letters (alphabetical) during station name preset.

•4/¢ (TUNE) buttons

Press the 4 button to decrease the frequency. Press the ¢ button to increase the frequency.

Use to move the cursor left or right during station name input.

•AM/FM button

Press the AM button to select the AM band.

Press the FM button to select and switch between FM1, FM2, and FM3 bands.

During station name input, selects digits and symbols.

•DIRECT/OK button

Selects the direct access tuning mode, used to input frequencies directly. Press this button again to cancel the mode while it is operating.

During station name input, stores the already input data in memory and ends the input mode.

During Station name preset play mode, selects station.

•SBF button

Enters and cancels the Station Name Preset Play mode.

•38 button

Selects the type of characters at the time of entering the station name.

— 35 —